Technical Program

PAP41

Contribution of fan and water pump drives to energy efficiency and reduction of emissions for commercial vehicles

Diego Pivatto Erberelli, MAHLE/ João Paulo Sparvoli Cardoso da Silva, MAHLE/ Edison Tsutomu Miyauchi, MAHLE BEHR/ Tobias Janitschek, MAHLE GMBH/ Evaldo Hatimine, MAHLE

PAP57

Analysis of the impact of sticking forces on the ethanol high-pressure direct injection nozzle

Beatriz Golin Arcêncio, IMT/ Clayton Barcelos Zabeu, IMT/ Fernando Malvezzi, IMT

PAP36

Thermal Management – a key technology for the success of e-mobility

Edison Tsutomu Miyauchi, MAHLE/ Diego Pivatto Erberelli, MAHLE/ Andre Marcelo Iglesias Cordeiro, MAHLE

PAP35

Vision systems applied in automotive quality processes: a systematic review

Vinicios da Silva Martins, SENAI/ Francisco Magalhães dos Santos Júnior, SENAI/ Leonardo Mendes De Melo, SENAI/ Giovani Costa Silva, SENAI/ Gabriel Estevam Sousa, SENAI/ Pedro Henrique Birais, SENAI/ Bruno Araujo de Sousa, SENAI

PAP48

Development of trucks fuel consumption testing methodology on flat horizontal roads using a towing trailer with electromagnetic brake, simulating programs with different slope levels and gross weights

Haraldo Rehder, REHDER CONSULTORIA DE ENGENHARIA, INOVAÇÃO E GESTÃO/ Gustavo Pamplona Rehder, USP

PAP67

Investigation of water injection for hydrogen combustion phasing control on a boosted spark ingition single cylinder research engine.

Juliano Silveira, UFSM/ Vinicius Roso, UFSM/ Nina Paula Gonçalves Salau, UFSM/ Mario Eduardo Santos Martins, UFSM/Thompson Diórdinis Metzka Lanzanova, UFSM

PAP42

Monitoring of the combustion process through ion current measurement in flex fuel spark ignition engines

Antonio Ferreira Socorro, POLI USP/ Rafael Oliveira Souza, POLI USP/ Leonardo Diaz Rocha, POLI USP/ Armando Antônio Maria Laganá, POLI USP/ João Francisco Justo Filho, POLI USP/ Ronaldo Domingues Mansano, POLI USP

PAP64

Remote validation during vehicle development phase: higher project reliability and better usage of validation vehicles through big data analysis.

Daniel Lucena de Athayde Guimarães, ROBERT BOSCH/ Eduardo Polli Jorgensen, ROBERT BOSCH/ Marcio José Moraes, ROBERT BOSCH/ João Marcos Cunha Drinko de Oliveira, ROBERT BOSCH/ Karen Cristina Kargel Parize, ROBERT BOSCH/ Guilherme Nenevê Sanches, ROBERT BOSCH/ Steicy Mayara dos Santos, ROBERT BOSCH

PAP53

Modular approach to energy management and hybrid control strategy

Felipe Carvalho, VALEO/ Robin Vincent, VALEO/ Ricardo Mourad, VALEO/ Lucas Salles Oliveira, VALEO/ Leticia Santos da Silva, VALEO/ André Malvezzi, VALEO

PAP70

Development of niche automotive lubricants: Optimization opportunities

Leonardo Ribeiro Duda, VIBRA ENERGIA/ Rodrigo Affonso Pfaffenzeller, VIBRA ENERGIA

PAP44

Thermal management of batteries for greater energy efficiency

Andre Marcelo Iglesias Cordeiro, MAHLE/ André Souza, MAHLE

PAP77

Digitization of engineering test bench

Willian Keiichi Tesuka, ROBERT BOSCH/ Lucas Leonardo Goy, ROBERT BOSCH/ Gustavo Scherpinski, ROBERT BOSCH

PAP59

Analysis of energy demand for recycling electric vehicle batteries through a flexible hydrometallurgical process

Luciana Assis Gobo, TUPY/ Andre Ferrarese, TUPY/ Elio Kumoto, TUPY/ Rafael Obara, TUPY/ Amilton Barbosa Botelho Junior, USP/ Jorge Alberto Soares Tenório, USP/ Denise C. R. Espinosa, USP

PAP20

Pedal feeling – New experiences with the brake system

Bruno Cesar Savioli Fischer, ROBERT BOSCH/ Bruno Romão, ROBERT BOSCH/ Emerson Batagini, ROBERT BOSCH

PAP12

Hydrogen production by ethanol reform: critical analysis and technological roadmap

Bárbara Rodrigues Freitas, ROBERT BOSCH/ Letícia Avelar Bergeron Lago, ROBERT BOSCH/ Ana Clara Lourenço Fregadolli, ROBERT BOSCH/ Gustavo Santos Lopes, ROBERT BOSCH/ Marcus Vinícius Oliveira Lopes, ROBERT BOSCH/ Gustavo Doubek, UNICAMP/ Fernando de Oliveira Junior, ROBERT BOSCH

PAP89

An application of engineering software in traffic image processing: a review based on traditional methods.

Lucas Fernandes Ferreira Costa, FORD/ Reinaldo da Silva Araujo, FORD

PAP61

Comparative study of deterioration factor and their trend, by real vehicle durability mileage on different driving cycles, SRC-LECV and AMA

Raphael Sedano, YAMAHA/ Marcelo Jorge da Costa Ribeiro e Azevedo, YAMAHA/ Rodrigo Okamoto Rivelino, YAMAHA/ Evandro Streiling Filho, YAMAHA/ Monica Higuchi Rosa, YAMAHA/ Eduardo Missao Sambuichi, YAMAHA

PAP32

Compatibility of validation equipment with high current applications (e.g. FlexStart™) due to the decoupling mode when performing fast pulse tests (ISO 7637-2 3a/3b)

Caio Ian Alher Carrasco, ROBERT BOSCH/ Isaac Monteiro Gentini, ROBERT BOSCH

PAP24

Hydrogen internal combustion engine as solution for the decarbonization of heavy-duty and off-highway vehicles

Heitor Souza Chaves, MAHLE/ Rafael Antonio Bruno, MAHLE/ Felipe Mazuco, MAHLE/ Hannes Marlok, MAHLE INTERNATIONAL GMBH/ Christian Trabold, MAHLE INTERNATIONAL GMBH/ Dr. Simon Schneider, MAHLE INTERNATIONAL GMBH

PAP92

Unveiling the future of smart manufacturing: a review of scientific articles on digital twin shop floor and optimization analyses

Henrique Klesse Pasianotto, ROBERT BOSCH/ Laercio Alves do Nascimento Junior, ROBERT BOSCH/ Pablo Deivid Valle, UFPR/ Max Mauro Dias Santos, UTFPR/ Fernando Deschamps, UFPR

PAP13

Catalyst heating modeling , simulation and optimization

Rodrigo Peralta Moraes Ruiz, ROBERT BOSCH/ Breno Felippe Coimbra Maia, ROBERT BOSCH/ André Pelisser, ETAS/ João Vitor Carrilho Soares de Carvalho, ETAS/ André Menegon Godoy, ROBERT BOSCH/ Rosalvo Bertolucci Filho, ROBERT BOSCH/ Fabrício Tenório Vicente, ROBERT BOSCH

PAP07

Benefits and impacts of latest generation lubricants in older diesel vehicles under a circular economy perspective: a case study in Brazil

Pâmela Fernandes de Oliveira Barreto, VIBRA ENERGIA/ Thiago Ferreira Veiga, VIBRA ENERGIA/ Rodrigo Affonso Pfaffenzeller, VIBRA ENERGIA/ Lucas Freitas de Lima e Freitas, VIBRA ENERGIA

PAP50

Study on the prediction of the mechanical properties of polymeric composites with polypropylene and graphene using artificial neural networks

Gabriel Gonem de Lima, FORD/ Bruna Farias de Bortoli, FORD/ Monique Camille Rodrigues Camargo, FORD/ Rodrigo Denizarte de Oliveira Polkowski, FORD/ Ricardo Ferreira Cavalcanti de Albuquerque, FORD

PAP23

Modeling of ICE piston cooling gallery oil filling ratio using SPH (Smoothed Particle Hydrodynamics) method.

Sergio Adrian Ferreyra, MAHLE

PAP16

The influence of the vacuum braking system on vehicle energy efficiency

Bruno Romão, ROBERT BOSCH/ Emerson Batagini, ROBERT BOSCH/ Bruno Cesar Savioli Fischer,ROBERT BOSCH/ Thiago Franceschini Mecatti, ROBERT BOSCH

PAP08

Development and evaluation an alternative methodology for the quantification of dyes in fuels by photometry

Leonardo Schaidhauer Duarte, VIBRA ENERGIA/ Eduardo Buarque de Alcazar, VIBRA ENERGIA/ Thiago Ferreira Veiga, VIBRA ENERGIA

PAP55

Design optimization to reduce corrosion in electric flex fuel pump

Vinícius Araújo Peres, ROBERT BOSCH/ Lazaro Benedito de Oliveira Melo, ROBERT BOSCH/ Luiz Eduardo de Azevedo Fernandes, ROBERT BOSCH

PAP27

Machine Learning: supervised algorithms and application for predicting the energy efficiency of vehicles

Pedro Gonçalves Venancio, MAHLE/ Estela Mari Ricetti Bueno, MAHLE

PAP39

Multiple injection strategy for ethanol port fuel injection engine

Rafael Lara Franco, ROBERT BOSCH/ Marcello Francisco Brunocilla, ROBERT BOSCH/ Gustavo Santos Lopes, ROBERT BOSCH/ Walter Arens, ROBERT BOSCH/ Victor Cardoso Maia, ROBERT BOSCH/ Fernando de Oliveira Junior, ROBERT BOSCH/ Marcus Vinícius Oliveira Lopes, ROBERT BOSCH

PAP10

Robust modeling of gum formation in Brazilian ethanol-gasoline blends based on design of experiments and artificial neural networks approaches

Florian Alain Yannick Pradelle, PUC RJ/ José Eduardo Sanson Portella de Carvalho, PUC RJ/ Brunno Ferreira dos Santos, PUC RJ/ Renata Nohra Chaar Pradelle, STELLANTIS/ Franck Turkovics, CONSULTOR/ Béatrice Perrier, STELLANTIS/ François Maire, STELLANTIS

PAP73

Application of Honda 3-Wet Primer-less technology in body painting for emission reduction (CO2 and VOC)

Regis Chinen, HONDA AUTOMÓVEIS/ Eduardo Yoshinori Honda, HONDA AUTOMÓVEIS/ Erich Sigolo, HONDA AUTOMÓVEIS/ Rodrigo Trevisoli, HONDA AUTOMÓVEIS/ Vagner Aparecido Pereira, HONDA AUTOMÓVEISs/ Fernando Barbosa, HONDA AUTOMÓVEIS

PAP28

Carbon Canister: technology, applications, development, validation

José Augusto de Oliveira Bazaneli, MAHLE/ Estela Mari Ricetti Bueno, MAHLE

Influence of oil control ring profile on real-time lube oil consumption and particulate emissions

Bruno Fineto, MAHLE/ Felipe Mazuco, MAHLE/ Fernando Santurbano Tavares Simas, MAHLE/ Guilherme Buzzi D´Alessandro, MAHLE

Safety in brazilian road traffic: fleet evolution, brazilian legislation and its contributions to road safety for automobiles and light commercial vehicles

Nicolas Dias, FEI/ Thiago Cury, FEI/ Jairo de Lima Souza, FEI/ Luiz Otávio Maciel Miranda, MINISTÉRIO DA SAÚDE/ Renan Roberto Bosso, FEI/ Eduardo Pichioli de Carvalho, FEI/ Fábio Gerab, FEI

Modeling the injected mass of biogas in an Otto combustion engine

André Vinicius Oliveira Maggio, POLI USP/ Marcos Henrique Carvalho, POLI USP/ Armando Antonio Maria Laganá, POLI USP/ João Francisco Justo Filho, POLI USP/ Felipe Costa Figueiredo Magaldi, POLI USP/ Bruno Silva Pereira, IPT/ Demerson Moscardini, FATEC

Advanced driving assistance system validation for brazilian market

Lauro Gonçalves, HONDA/ Rodrigo Florenziano Loureiro, HONDA/ Mauricio Tadeu Fagiani Correa, HONDA/ Thiago Bonjiovani, HONDA/ José Edgar Romero Trigo, HONDA

Cylinder head cover and frame for MAN application (VWCO) engine D08.Integration of the oil separator, cooling pipe and other components to comply with CONAMA P8 regulations

Armando Higa, MAHLE/ Bruno de Castro Bastos Lagoeiro, VOLKSWAGEN CAMINHÕES E ÔNIBUS/

New optimized bus structure to improve the roll-over test (ECE R66) using structural foam (Terocore) with high strength steel

Adriana Lopes Siqueira, IDIADA/ Mateus Dal Piccol, IDIADA

Influence analysis of ignition timing and air-fuel ratio on indicated efficiency for biogas engines

André Vinicius Oliveira Maggio, POLI USP/ Marcos Henrique Carvalho, EPOLI USP/ Armando Antonio Maria Laganá, POLI USP/ João Francisco Justo Filho, POLI USP/ Felipe Costa Figueiredo Magaldi, POLI USP/ Bruno Silva Pereira, IPT/ Demerson Moscardini, FATEC

Development and implementation of a system for fatigue detection in truck drivers: computer vision-based alert system

Lucas Gomes de Almeida, VOLKSWAGEN TRUCK AND BUS/ Ivan Arantes Levenhagen, VOLKSWAGEN TRUCK AND BUS/ Jardel Manoel Vieira, VOLKSWAGEN TRUCK AND BUS

Development of a 12 volts electrical heated catalyst as a clean and affordable solution for brazilian market.

Vincent Bigliardi, AVL/ Murilo Artur Ortolan, RENAULT/ Alexandre Moura da Silveira, RENAULT/ Guilherme Neves, RENAULT / Frederico Falcão Weissinger, AVL

Robust design optimization of a fuel modules flange aiming a fail safe

Luciano Rafael Hansel Frose, ROBERT BOSCH/ Rafael Almeida, ROBERT BOSCH/ Gustavo Mestriner, ROBERT BOSCH/ José Tobias Junior, ROBERT BOSCH/Marco Antônio Luersen, UTFPR

Influence analysis of biogas on internal combustion engine volumetric efficiency

André Vinicius Oliveira Maggio, POLI USP/ Marcos Henrique Carvalho, POLI USP/ Armando Antonio Maria Laganá, POLI USP/ João Francisco Justo Filho, POLI USP/ Felipe Costa Figueiredo Magaldi, POLI USP/ Bruno Silva Pereira, IPT/ Demerson Moscardini, FATEC

Nodular cast iron for new generation of piston engines produced from 3D printed cores

Marina Furbino Martins, TUPY/ Carlos de Souza Cabezas, TUPY/ Marcelo Henrique Buschmann, TUPY

Comparison and detailing of vertical dynamic models and their application contexts

Paulo Henrique Dayrell Drummond de Oliveira, UFJF/ Vitor Mainenti Leal Lopes, UFJF/ Anderson Muniz Calhabeu, PROMETEON TYRE GROUP

Vehicle crashworthiness virtual assessment: study under annex 8, un R21.01 requirements

Caio Felipe Vinturini, GENERAL MOTORS/Tiago Sartor, GENERAL MOTORS/ Leonardo Mazzariol, GENERAL MOTORS/ Mateus Dal Piccol, IDIADA/ Manuel Laso, IDIADA

Development of a bidirectional charger for electrified vehicles – distributed microgeneration

Ariston Vinícius Pimentel Aarão, AVL/ Luis Fernando Barreto de Godoi, AVL/ Bernardo Pelliciari, AVL/ Eugenio Coelho, AVL/ Vincent Bigliardi, AVL/ Frederico Falcão Weissinger, AVL/ Wagner de Camargo Orlof, AVL Regensburg

Study of the mechanical and microstructural behavior of AISI 441 ferritic and SAE 304 laser welded steel sheets

Beatriz Lima Gino De Carvalho, FSA/ José Agustín Castillo Lara, FSA/ Camila de lima Alves, FSA/ Jennifer Jéssica Alves De Lima, FSA/ Guilherme Bortolotto Tosetto, FSA

Life cycle CO2e analysis: direct comparison between ICE vehicles, with fossil and renewable fuels, and electric vehicles

Murilo Artur Ortolan, RENAULT/ Caroline Pereira, RENAULT/ Edvan Palioto, RENAULT/ Camilla Verbiski de Andrade, UTFPR/ Adriano Cardon Castro, RENAULT/ Damian de Souza Moretti, RENAULT

Reverse logistics of lubricant oil and packaging in brazil: analysis of the value chain and business opportunities for sustainable waste management

Lucas Freitas de Lima e Freitas, VIBRA ENERGIA/ Julio Cesar Zamperlini Santos, VIBRA ENERGIA/ Luma Cabral, LWART/ Carolina L Pimenta, LWART/ Marcell Souza Delgado, VIBRA ENERGIA/ Andreza Frasson Balielo, LWART/ Thiago Ferreira Veiga, VIBRA ENERGIA

Lean maturity level analysis for industry 4.0

Anderson Tadeu de Santi Barbosa de Almeida, UFABC/ Ugo Ibusuki, UFABC/ Douglas Roberto De Gennaro, UFABC

Automated validation of variable flow fuel pump diagnosis in virtual environment

Andréa Regina Domingues, FORD/ Claudio Guercio Labate, FORD/ João Pedro Vieira Ceccatto, FORD/ Vilmara de Sousa Lira da Silva, FORD

Use of machine learning based digital twins on vehicle emissions tests.

Eduardo Tomanik, POLI USP/ Victor Tomanik, DENTSU/ Antonio J. Jimenez-Reyes, UNIVERSIDAD POLITÉCNICA DE VALENCIA/ Bernardo Tormos, UNIVERSIDAD POLITÉCNICA DE VALENCIA

Nanolubricants applied in the automotive industry

Camila Novo da Rocha Amaral, VIBRA ENERGIA/ Thiago Ferreira Veiga, VIBRA ENERGIA/ Leandro Bordalo Schmidt Marques, VIBRA ENERGIA/ Leonardo Ribeiro Duda, VIBRA ENERGIA

Study of the mechanical properties of some structural aluminium-steel joints

Leonardo Rodrigues Danninger, USP/ Marcelo Gonçalves, ALPINA CONSULTORIA TECNOLÓGICA E EDUCACIONAL/ Ana Paola Villalva Braga, IPT

Development of electromagnetic compatibility tests in a simulated environment

Thayle Douglas de Andrade, ROBERT BOSCH/ Elen de Jesus Santana, ROBERT BOSCH/ Isaac Monteiro Gentini, ROBERT BOSCH/ Caio Ian Alher Carrasco, ROBERT BOSCH

Estimation of exhaust gas temperature for a biogas engine

Marcos Henrique Carvalho, POLI USP/ André Vinicius Oliveira Maggio, POLI USP/ Armando Antonio Maria Laganá, POLI USP/João Francisco Justo Filho, POLI USP/ Felipe Costa Figueiredo Magaldi, POLI USP/ Demerson Moscardini, FATEC/ Bruno Silva Pereira, POLI USP

Influence of brazilian gasoline sulfur content on regulated pollutant emissions

Rogério Nascimento de Carvalho, PETROBRAS/ Guilherme Bastos Machado, PETROBRAS/ Katia Moniz da Silva, PETROBRAS/ Tadeu Melo, PETROBRAS/ Pedro Caffaro Vicentini, PETROBRAS/ Leonardo Pedreira Pereira, PUC RJ/ Sergio Leal Braga, PUC RJ

Additive manufacturing and computer simulation: a review of integrated technologies and applications.

Wesley Vinícius Domingues, ROBERT BOSCH/ Rodrigo Pulido Arce, ROBERT BOSCH/ Luciano Rafael Hansel Frose, ROBERT BOSCH

Classification of the probability of exposure to hazardous scenarios according to ISO26262 a model based on connected vehicle data

Rafael Santos de Oliveira, FORD/ Maísa Lauriane Ferreira dos Santos, FORD/ Manoel Felipe Costa Almeida Fernandes, FORD/ Thomaz Henrique de Melo Previato, FORD